The MTD shifting On The Go lawn tractor transmitting , also call Transmatic , is a dim-witted blueprint that combines a unmarried - speed transaxle with forrader and reverse gears and a variable - speed belt thrust . Although the speeding control has six or seven post , depending on tractor model , these positions are actually nothing more than shifter detents . The foot brake / grasp foot pedal is link to the same belt - drive control , so the speed control is similar to a " cruise control " on a railroad car .

Step 1

seat on the tractor and free the PTO . position the shifter in Neutral , the pep pill control in Park , and push the clasp / brake all the way down .

Step 2

rip out the choke knob and advance the throttle control . Turn the Francis Scott Key and get down the tractor . Push the choke coil control in .

Step 3

Move the shifter to the " Forward " position . Move the focal ratio ascendancy to the " 1 " or " 2 " position . give up the grip / pasture brake bit by bit . Once you are affect , march on the speed dominance to a speed you are comfortable with .

Step 4

Push the clutch / pasture brake foot pedal to slow down for obstacle . you could hold the pedal in any spot that gives you the desire speed , with no peril of damaging anything . publish the pedal to resume speed .

Step 5

Push the clutch / brake pedal all the way down to stop . Shift from " Forward " to " Reverse " while holding the treadle down , then free the pedal to back up .

Step 6

Push the clutches / brake pedal point all the way down , shift to " indifferent , " and place the speed control in " Park " to park the tractor .

Troy-bilt Lawn Tractor Hard To Shift In Gear?

Without adequate lubrication , the power train in the infection can become loth and hard to lurch . If the transmission fluid layer is low , in particular when you ’ve recently filled the reservoir , check the area where you park the lawn tractor for evidence of a ruddy - colored fluid which may indicate a transmittal fluid leak . From meter to time , the gear mechanism on the Troy - Bilt lawn tractor may develop mechanical problems . When the problem is a mechanical one , avoid working on it yourself . On automatic models , switch the throttle to the riotous military position and lay the shift lever in forward or reverse . mistreat on and exhaust the clutch / bracken pedal to issue the parking pasture brake . Failure to shift in this manner can cause hard shifting or damage the gears .

Warning

Always watch where you are going , and do not engage the tractor when tiddler are nearby .

Tip

If you engage the PTO , you will have to disengage it before back up .

References

…